June 2008 – Blog of Roganty

My last post was about me playing about with old computers, the update is that I have reverted back to Puppy Linux as Zenwalk Linux kept throwing up “Disabling IRQ #10 – Nobody cares” and that was the IRQ the network card was using so I would lose the network!

This post is about me playing with new computers, or more specifically, I was building a new computer for my mum.
The computer I built is loosely based around my computer, its got a similar motherboard, the same memory and power supply, and its got my processor!

I brought myself a faster processor and a heat sink and I put my old processor in my mums computer!

Here’s a handy hint for trying to remove the heat sink from a processor, make sure the processor and heat sink is warm, because when the thermal paste is cold, it sticks like super glue!

Yes, I did manage to pull the processor out of its socket just by trying to get the heat sink off 😳 lol!
I also had trouble putting the new heat sink on to the new processor, I applied the thermal paste alright, I just could not get the clips to clip into place! And I swear all of the thermal paste has squeezed out of the sides!
I’ll find out when I next try to remove the heat sink! 😀

Till next time
Happy building!

These past two weeks since I last posted I’ve been showing some old computers the “free” way!
I sent Windows 98SE to the recycle bin, and installed Linux! Or more specifically I first installed Puppy Linux, and then Zenwalk Linux

I got Puppy running on one, but the x windows system wouldn’t start up, so I switched to a second computer, and got it installed and running! The wireless network worked straight out of the box, except that it I had to unhide the network SSID for it to connect!
I ditched Puppy because I just couldn’t get the wireless started on boot-up!

So I went with Zenwalk Linux. It installed without a hitch, the desktop runs a little slow but I’m going to see if I can get another one installed instead.
But wireless didn’t work, so I had no connection to the internet, and the kernel module for the wireless card wasn’t installed by default. I managed to get the files needed onto the computer, but it stopped compiling with an error.
Luckily the NDIS wrapper program was installed so I could use the Windows driver provided with the network card on Linux.
I downloaded the install program from the Belkin website
~ $ cd Download/f5d7000v3_2.2.7.0 f5d7000v3_2.2.7.0 $ ls -l total 23796 -rw-rw-r-- 1 anthony anthony 24333824 2008-06-01 20:26 f5d7000v3_2.2.7.0.exe f5d7000v3_2.2.7.0 $ unzip -a f5d7000v3_2.2.7.0.exe Archive: f5d7000v3_2.2.7.0.exe inflating: start.exe [binary] inflating: files/._setup.exe [binary] inflating: files/rt2500.cat [binary] inflating: files/Rt2500.inf [text] inflating: files/Rt2500.sys [binary] inflating: files/Rt25009x.sys [binary] inflating: files/setup.exe [binary] inflating: manual/._manual.pdf [binary] inflating: manual/manual.pdf [binary] inflating: other/.DS_Store [binary] inflating: other/._.DS_Store [binary] inflating: other/._ar500enu.exe [binary] inflating: other/._flashmain.swf [binary] inflating: other/._icon.ico [binary] inflating: other/ar500enu.exe [binary] inflating: other/flashmain.swf [binary] inflating: other/icon.ico [binary] inflating: AUTORUN.INF [text] f5d7000v3_2.2.7.0 $ ls -l total 27104 -rw-rw-r-- 1 anthony anthony 45 2004-10-25 18:45 AUTORUN.INF -rw-rw-r-- 1 anthony anthony 24333824 2008-06-01 20:26 f5d7000v3_2.2.7.0.exe drwxrwxr-x 2 anthony anthony 4096 2008-06-03 12:43 files drwxrwxr-x 2 anthony anthony 4096 2008-06-03 12:43 manual drwxrwxr-x 2 anthony anthony 4096 2008-06-03 12:43 other -rw-rw-r-- 1 anthony anthony 3343706 2004-08-24 10:41 start.exe f5d7000v3_2.2.7.0 $
And it worked! I got it connected and onto the internet in no time at all, and the best bit, it connects to the network while its booting up!

I haven’t decided yet, but I might either go back to Puppy, or install a different distro, maybe DSL or Vector Linux

Month: June 2008

Playing with new Computers!

Playing with old Computers!