Upgrades & Updates

Has it really been a month since my last post!?

Since then and now, Christmas and then the New Year has been and gone. All the turkey has gone and the Christmas chocolates have been eaten, and the last few Christmas nibbles and pickles are still being shared around!

My sister has moved out and is renting a place with her boyfriend. We’ve not noticed much difference, because before she was hardly home anyway!

 
Last week my trusty 17 inch monitor gave up the ghost, so I had to make do with an old CRT while my new 19 inch wide screen monitor was delivered. Interestingly, the screen is just a little shorter than the old one, but boy, does the width make a difference! 1440×900 pixels baby!

Also, after a forced upgrade to my monitor, I also decided to bite the bullet and upgrade my operating system. I went from Fedora 7 to Fedora 10 in a matter of two days!

After going down the doomed upgrade current installation path, I then tried the old delete-it-and-install-a-fresh route, and it worked!

But like all new things there were teething problems, I would loose network connectivity if I tried to assign a static IP address, but I had no problems getting onto the Internet if I used a dynamic IP address. I found a solution on the Fedora forum, which didn’t work, but I did find a solution that works.

I had another problem with Firefox, or more specifically with Fast Dial. When getting a website preview, it would cause the whole system to just hang.

My problem with Pidgin was solved by setting my public IP address, or I could of solved it by configuring a STUN server, strange how this didn’t affect the last version!

I still haven’t been about to mount CD’s, but I’ll work on that when I get more time, I just need to edit the fstab file, I don’t know why it wasn’t set automatically!

Other than that its been great, KDE 4 looks and works great, I’m still getting used to the changes, the main menu set up is a little weird, but it’s cool!

I have a spare partition on the hard drive which I was going to install Windows XP, but I might install another distribution I was looking at, Foresight Linux.

 
I have also updated my website, last year in December I upgraded my installation of WordPress to 2.7, and moved a few things around so that (eventually) the whole website (will) run on WordPress. The only two pages not currently running on WordPress is links and photos.

I have also updated the design, but there’s still a couple of areas that I need to sort out, like the home page, comments and the footer, but, overall I think the design is all finished, it’s not a complete redesign, but I think that it improves the overall look and feel of my site.

Playing with old Computers!

These past two weeks since I last posted I’ve been showing some old computers the “free” way!
I sent Windows 98SE to the recycle bin, and installed Linux! Or more specifically I first installed Puppy Linux, and then Zenwalk Linux

I got Puppy running on one, but the x windows system wouldn’t start up, so I switched to a second computer, and got it installed and running! The wireless network worked straight out of the box, except that it I had to unhide the network SSID for it to connect!
I ditched Puppy because I just couldn’t get the wireless started on boot-up!

So I went with Zenwalk Linux. It installed without a hitch, the desktop runs a little slow but I’m going to see if I can get another one installed instead.
But wireless didn’t work, so I had no connection to the internet, and the kernel module for the wireless card wasn’t installed by default. I managed to get the files needed onto the computer, but it stopped compiling with an error.
Luckily the NDIS wrapper program was installed so I could use the Windows driver provided with the network card on Linux.
I downloaded the install program from the Belkin website
~ $ cd Download/f5d7000v3_2.2.7.0
f5d7000v3_2.2.7.0 $ ls -l
total 23796
-rw-rw-r-- 1 anthony anthony 24333824 2008-06-01 20:26 f5d7000v3_2.2.7.0.exe
f5d7000v3_2.2.7.0 $ unzip -a f5d7000v3_2.2.7.0.exe
Archive: f5d7000v3_2.2.7.0.exe
inflating: start.exe [binary]
inflating: files/._setup.exe [binary]
inflating: files/rt2500.cat [binary]
inflating: files/Rt2500.inf [text]
inflating: files/Rt2500.sys [binary]
inflating: files/Rt25009x.sys [binary]
inflating: files/setup.exe [binary]
inflating: manual/._manual.pdf [binary]
inflating: manual/manual.pdf [binary]
inflating: other/.DS_Store [binary]
inflating: other/._.DS_Store [binary]
inflating: other/._ar500enu.exe [binary]
inflating: other/._flashmain.swf [binary]
inflating: other/._icon.ico [binary]
inflating: other/ar500enu.exe [binary]
inflating: other/flashmain.swf [binary]
inflating: other/icon.ico [binary]
inflating: AUTORUN.INF [text]
f5d7000v3_2.2.7.0 $ ls -l
total 27104
-rw-rw-r-- 1 anthony anthony 45 2004-10-25 18:45 AUTORUN.INF
-rw-rw-r-- 1 anthony anthony 24333824 2008-06-01 20:26 f5d7000v3_2.2.7.0.exe
drwxrwxr-x 2 anthony anthony 4096 2008-06-03 12:43 files
drwxrwxr-x 2 anthony anthony 4096 2008-06-03 12:43 manual
drwxrwxr-x 2 anthony anthony 4096 2008-06-03 12:43 other
-rw-rw-r-- 1 anthony anthony 3343706 2004-08-24 10:41 start.exe
f5d7000v3_2.2.7.0 $

And it worked! I got it connected and onto the internet in no time at all, and the best bit, it connects to the network while its booting up!

I haven’t decided yet, but I might either go back to Puppy, or install a different distro, maybe DSL or Vector Linux

Finally Updated!

I must start this post with an apology to anyone who is subscribed to my feed!

Earlier today I finally upgraded my blog to WordPress 2.5. At the same time I took the opportunity to clean out my database, quite literally I reformatted my blog!

This involved me exporting all my posts, and blogroll, deleting all WordPress files, apart from my theme and wp-config.php, and then deleting all the WordPress tables from the database!
Then I installed the new version of WordPress and ran through the install. I then deleted the test post, and updated some of the options. I then imported all of my old posts into the fresh install.

That was only this morning, now what have I been doing for the past two weeks since my last post?
The answer, nothing much!

The only notable exception is that I have finally got my new computer up and running!

I installed both Fedora 7 and Windows XP onto the first hard drive, Linux on 100Gb, and Windows on 60Gb.
I am using the 500Gb hard drive for all of my files, on Linux this is mounted as /home

The new computer is working brilliantly, and its so much quieter than my previous computers!
I’ve just got to get a set of speakers, and possibly a new heat sink/fan for the processor, and that will be it sorted!

It’s getting quite late now, so thats it for this post
Till next week!

I didn’t decide to stay on holiday!

I should start this with a link to my holiday photos on flickr.
I know that its been over a month since i got back off holiday, and i haven’t posted anything on my blog!
But I’m going to now!

I was going to start this post with details of our holiday, but I’ll now leave that for another post!

What has caused the long delay on posting? I don’t know really, but I think its time!
Ive been busy at work, and when I’m not at work I’m with my girlfriend, and I just don’t seem to have the time left to do anything else!
But I have managed to build myself a second computer! I am going to be using as a file-cum-web-cum-print-server.

A couple of years ago I brought a Via EPIA Mini-ITX motherboard from www.mini-itx.com which I was intending to put inside my old radio alarm clock.
I did put it inside the radio alarm clock, but I never got around to actually installing an operating system onto it, and ever using it, so its been sat on my desk gathering dust.

I’ve been wanting to change my main computer for something a little faster, and I thought now would be a good time to do something with the little computer!
So I brought a case, installed Fedora 7 onto it, and now I’m just trying to get file sharing going between it and an aging Intel Celeron (333MHz) via wireless, and two other relatively old computers (both AMD’s, a K6 500MHz and an Athlon 850MHz)

I’ve just brought 1Gb of memory for it, as when I initially got i, I only brought 256Mb for it!

I’ve already got the web server running, and webmin, now I just need to install the printer, and its practically done!

I’m typing this post up using the new computer!

I’ll post more details soon!
Until next time!
Bye!

Edit: I’ve fixed the type of my Mini-ITX motherboard to a VIA EPIA series motherboard, and I have updated the link to point to the correct url (http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=21)